The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1425956 · 03-23-2012, 02:15 PM

Next we will remove the actual vent window weather strip that seals the back side of the glass when shut. It is held in place with several metal tabs that are just bent over to hold it in place. Image below:

This shows the metal tabs after they have been bent back up (straight) so the trim can be removed.

Removing the trim piece. It has a little weather strip adhesive on it from the factory, but it is not too sticky.

Removed completely:

03-23-2012, 02:15 PM	#35
1425956 Registered User Join Date: Mar 2011 Location: Joplin, MO Posts: 161	Re: Rebuilding Vent Windows, How To... Next we will remove the actual vent window weather strip that seals the back side of the glass when shut. It is held in place with several metal tabs that are just bent over to hold it in place. Image below: This shows the metal tabs after they have been bent back up (straight) so the trim can be removed. Removing the trim piece. It has a little weather strip adhesive on it from the factory, but it is not too sticky. Removed completely: __________________ Jeremy I have done so much, for so long, with so little, I can do anything with nothing! 1984 GMC Sierra Classic-1/2 ton-SWB (R.I.P.) 1986 GMC Suburban 3/4 ton 4x4 2014 GMC Sierra LTZ Z-71 Crew SWB