[truckdude239]

Originally Posted by bwood

The front end should have 11 grease zerks:

1. Pass Upper Ball Joint
2. Pass Lower Ball Joint
3. Pass Outer Tie Rod
4. Pass Inner Tie Rod
5. Idler Arm to Center Link
6. Idler Arm Bracket (next to lower radiator hose)
7. Pitman Arm to Center Link
8. Driver Inner Tie Rod
9. Driver Outer Tie Rod
10. Driver Lower Ball Joint
11. Driver Upper Ball Joint

Also check the drive shaft U-Joints, if they have been replaced, they may have grease fittings.

most ly your lower ball joints are empty on greece and it it been squeaking for a while probley going to need to be replaced