The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Kabwe · 05-06-2012, 01:36 PM

Hey xpickup aka Shannon

I remember we were talking a talking sheetmetal so I snapped this pics for you. I used a 3/32 2% ceriated tungsten and 1/16 filler rod and tried to keep the smallest HAZ I could. Tig sheetmetal is great you can see how low the bead profile is and some of the metal finishing I started. Man you can hammer and dolly that HAZ to your hearts desire.

05-06-2012, 01:36 PM	#964
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: Kabwe's aka Bam's build Hey xpickup aka Shannon I remember we were talking a talking sheetmetal so I snapped this pics for you. I used a 3/32 2% ceriated tungsten and 1/16 filler rod and tried to keep the smallest HAZ I could. Tig sheetmetal is great you can see how low the bead profile is and some of the metal finishing I started. Man you can hammer and dolly that HAZ to your hearts desire. Last edited by Kabwe; 05-06-2012 at 08:42 PM.