Quote:
Originally Posted by 1977K10
Oh, yea, I checked to make sure I didn't damage the seal I used a small pick yesterday with trans fluid to slide the seal into the groove, and the center seal into the case, I double checked that as to make sure there was no damage, as fun as this has been, A don't want to have to pull the trans back out to redo a seal.
|
Once you get the forward and direct packs toghter you can drop then into the pump and with about 10-20 psi of air check to make sure they are applying just to be sure.
Once the piston is in all the way when you set the springs on the piston you will only have to compress the springs about a 1/2" to get the snap ring in.