[chase1873]

Hey guys, I have a question regarding the rear trailing arms mounts. I recently purchased the ECE rear drop kit (6'' springs, shocks + relocate and a track bar kit). I also purchased some trailing arm bushings, front shocks, 2.5'' drop spindles and NAPA replacement parts for the rest of the front end. I already owned 2'' drop springs. 4.5/6 drop.

So to my question. I recently flipped the trailing arm mounts on the crossmember over (upside down) as I saw on this thread a while back. I did this with the intention of regaining some of the stock geometry in the trailing arms with the 6'' springs in the back. My concern is that the trackbar will be set up/ designed for the trailing arms to be mounted in their stock manor and that my truck will track crooked down the road... Should I flip these trailing arm mounts back over to run this track bar? or am i worrying about nothing?

Ps... good sway bar info on hear thank you.