The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Slammit · 10-24-2012, 10:50 AM

I'm anxious to hear about this.
IMO...these set screws should have at least Loctite Blue (or similar) and any other screws/nuts up and down the steering shaft and in these bolt on kits that don't have nylon (locking) nuts should be using Loctite Blue.
I'm saying this not knowing if that is even the problem or even if there is a real problem for the C10 installations...

10-24-2012, 10:50 AM	#39
Slammit Registered User Join Date: Apr 2010 Location: Aledo, TX Posts: 14	Re: Bolt on Rack and pinion I'm anxious to hear about this. IMO...these set screws should have at least Loctite Blue (or similar) and any other screws/nuts up and down the steering shaft and in these bolt on kits that don't have nylon (locking) nuts should be using Loctite Blue. I'm saying this not knowing if that is even the problem or even if there is a real problem for the C10 installations...