The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 12-25-2012, 11:53 PM

U are going to have to put a connection on the block to get the warm water into the heater some how. Take a senor out of the engine block and put a nipple with a tee in it for the water and senor both if u have to.
The water line going to the radiator is the one you need to change for sure. My opinion anyway.

12-25-2012, 11:53 PM	#34
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Heater core water hose routing U are going to have to put a connection on the block to get the warm water into the heater some how. Take a senor out of the engine block and put a nipple with a tee in it for the water and senor both if u have to. The water line going to the radiator is the one you need to change for sure. My opinion anyway. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.