Quote:
Originally Posted by shortbed70
My dash lights are always on when key is on and my blinkers light up but don't blink! Ideas on where to start?
Posted via Mobile Device
|
Check to see if you dont have one of your wires grounded that shouldnt be. If you are running stock guage cluster, they should be frame grounded at the socket.
I had to correct a similar issue with my dome light because I thought one wire was a ground and it wasnt. The two wires going to my dome are orange=constant hot....white=controled hot thru the headlight control switch.
Your turn signals are either a ground issue, or a bulb issue. Sometimes but not always it will be a socket issue. On these old rigs, one bad bulb or socket will muck up the entire blinker system.
Hope that helps, if not I hope you post what the solution was ....... always game to learn a new trouble shooting trick on these builds !!