Re: 51 Chevy 1/2 ton, My S10 swap
Thanks for the comments!
The bed floor is bolted through the box sides. The bolts go thru the frame in the corners with a welded in nut inside the stake pocket. I fit it all up and welded the nuts in, then capped the sides of the stake pockets. I also have a bolt on each side, in the center, that is behind the tire so it's not easily seen. I was really trying to build the whole box with out any visible hardware and not welded any where in case I would ever need to replace or repair anything. Also when it gets painted I can paint the pieces and then assemble the box.
Blue jeep I will check the tire size and let you know.
|