Re: SiX-fo SuBuRbAn
I had to relieve the firewall a little bit for the bbc valvecovers the lh side I cut a piece out, then folded it in on itself, made a patch for the top, and tapped the bottom in until it was the same shape.
the rh side didn't really need much, so I cut around 3 sides , pushed it in a bit, and then welded it back up.
I used the old cowl setting on the frame to see where I needed the room for the engine.
before I put the body on I spray bombed the firewall.
Last edited by jonzcustomshop; 02-13-2013 at 07:16 PM.
|