here it is!
I left a bunch of stuff on the roof, and now I'm going to need a step ladder to retrieve it!
you will notice that the rear wheels are off a little bit, I did this on purpose for 2 reasons, 1. I didn't want to have to pay to get a driveshaft shortened
, and 2. since I am replacing the lower 1/4's and wheelwells due to rust I wanted to go with the longer fleet side wheelwells, because they are bigger, and I think will fit the 33's, or 35's better than the short sub wheelwells, also because that's all I have!
Interesting note.. I measured the centerline of the 1/4 to the ground,on this (51 inches) and the centerline to the ground on my stock 63 3/4 4x4, and this sub is exactly 4 inches taller, which is the amount of lift I added to the 73-87 suspension.. I thought the 63 sat higher than that, but I guess it dosen't.