Re: Center link 68 chevy
You will need the center link to match the spindles/tie rods. The other option is a billet tie rod adapter sleeve that has the early smaller threads on one side and larger 73 up threads on the outside.
I would imagine you could drill the center link if you could find the proper size tapered end mill but the first two options are cheaper than a good tapered end mill if one even exists for that size/angle taper.
__________________
Dan <---(my name)
67 SWB C10 project "GEORGIA"- 59 Brookwood 2dr wag...Next project- 03 Tahoe 4x4 5.3 family ride- 07 Hondur Accord, commuter car
|