Well got a lot of little stuff wrapped up this weekend...Buttoned up all of the little bolts up front, got the meth injection tubing secured drivers side engine bay wiring harness finished up, the front splash apron on, in the back I got a whole bunch done as well. I took out the oem shock tower crossmember and got my gooseneck hitch cut to size and set in place I also built some shock mounts and figured out a mounting system behind the axle outside the frame rail that still uses the factory sized shocks and has full travel from the axle touching the frame rail to past my full bag height! I also secured all of the brake lines properly so they do not get pinched like it looks like in the shock picture. And I do have new shocks, I just used the old ones to mock up with
