Quote:
Originally Posted by PanelDeland
WELCOME!!! Jim I suggest you toss the WD40 to the back of the toolbox and get some better penetrating oil.I like PB blaster ,Kroil or a 50/50 mix of acetone and ATF.WD40 stands for Water Dispersant Formula #40.You'll have a lot better luck with the above.I hope you have a good breaker bar and cheater for the rear spring bolts.The PB will be available at your LAPS(local auto parts store).You might get lucky and find some Kroil but I doubt it.
|
I do have a few cans of PB Blaster. I have been building customs out of old Honda 750s for a few years and have found that WD40 is a great cleaner/rinse. Then before trying to break things loose spray the PB blaster -give it a try I think it works better than just the PB blaster by itself. When I was under the truck wire brushing all the bolt ends i realized that several of the nuts are pretty big. I did have to buy a new set of impact sockets as my current set only went up to 1".
Posted via Mobile Device