[haybale]

Here are the pictures I was trying to put on last night. I used some plastic sheeting and made a small paint area in my office. That is the only area that I can keep warm enough right now. The trick was getting the engine lift thru the entry door by myself. The legs completely collapsed on the lift where still 39in and the door opening is 36in. The paint I used was Eastwood's extreme chassis black in spray cans. It laid down really well and looks great. I used an acid based product called Etch Tech to help remove the rust and then sanded and wire wheeled the housing till no signs of rust could be seen. Before spraying I wiped the whole rearend with rubbing alcohol to get any oil or dust off.