Quote:
Originally Posted by Goats86
When you raise it up the panhard bar pulls the rear end to the side. This is normal. Drop it down and that distance should be about the same. Most panhard bars for drops are adjustable for this reason.
|
Thanks for your reply. The Jack stands are under the rear end so it's like it's on the ground with the weight on the axle/wheels. I think the problem is the box is off center. When I measured today from each wheel to the frame the measurement was the same so the rear end is centered. When I measured from the frame to the outside edge of the box it's off from one side to the other. Going to double check this when I get the box off.