The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67ChevyRedneck · 03-11-2014, 03:34 PM

I spent a couple hours doing the same thing last night. The best I could get it was to where it was just barely rubbing the WP pulley and it's cut down so the nose of the fan is almost on the radiator. It's just not going to fit. My radiator is only 17" wide by 16.5" top to bottom (fin area). The contour fan would fit width - wise, but being a dual fan, I don't think I could cut it up and make it work properly, plus it's only a single speed fan, I would need both.

I love the Taurus fans. I used one on my 99 S10 back in the day. I had it completely hidden within the factory shroud.

03-11-2014, 03:34 PM	#220
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 1965 Ford Mustang I spent a couple hours doing the same thing last night. The best I could get it was to where it was just barely rubbing the WP pulley and it's cut down so the nose of the fan is almost on the radiator. It's just not going to fit. My radiator is only 17" wide by 16.5" top to bottom (fin area). The contour fan would fit width - wise, but being a dual fan, I don't think I could cut it up and make it work properly, plus it's only a single speed fan, I would need both. I love the Taurus fans. I used one on my 99 S10 back in the day. I had it completely hidden within the factory shroud. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!