[19GM71]

Originally Posted by Andy4639

Yea I would be putting a cotter key in that bolt for sure. The hem's should be OK, but a little oil are grease on them every so often wouldn't hurt I guess. You can buy them with zerk fittings for grease. Here is the 5/8" from Speedway.




http://www.speedwaymotors.com/AFCO-1...ale,41039.html

Andy4639, I did go and check on that heim from Speedway with the zerk fitting. It is not the size needed to fit my 71 factory inner tie rods. Those are a 5/8-18 and my 71 inner tie rod is a 11/16-18. But I may look into how I could drill them and install my own zerk.