Quote:
Originally Posted by 68C15
you did make sure the distributor is installed with the rotor contact pointing at the 6 inside the triangle while cylinder #1 is at TDC, right? Don't trust the marks on the balancer since there is 2 of them.
|
Got a new distributor cap to day on the way home from work. (work 3rd and 12s on weekends) Used a ohm meter to check which termenal went to #1 tower(all the way to the opposit side of cap by the tryangle with the 6 in it) pulled the distrbutor and turned it 180 degree to match. thanks for the tip!