Quote:
Originally Posted by ls1nova71
BR3W, you have it right, and your brake switch will be fine, and no extra relays are needed. Just hook the wire to pin 6 on the TAC from the "hot when applied" side of the brake switch. The other side is for the TCC and you already have that hooked up so you're good there. The only problem you may encounter is if you have LED brake lights.
|
Thanks dude. I do have the LED' tails, but they are the "bulb" type that have the resistors in them to operate flashers, I might be able to get away with it. If not, I'll stick a dummy bulb somewhere, unless there is more elegant solution.