Quote:
Originally Posted by FarmerSid
Portholes....How'd you install them? New term and feature I haven't heard of.
|
Install was easy, first i chose a spacing on the hood, then made a template out of cardboard. taped the template to hood then with my trusty sharpi marker traced out the template on both sides. then i used a 1-1/2" hole saw and cut out each corner, warning use a sharp pilot drill! this will leave a small center section that i removed with a die grinder. then it was remove a small amount at a time testing the fit. all 6 took maybe 1.5 hrs.