Re: S10 Swap how to
Now, if you want your truck low, but not bumper bashing low, use the following dimensions (pdf doc) on your cab mounts. Core support mounts stay the same, since they are welded to the side and bolted to the frame.
The second pic is of this (version 2) setup on 25" tall tires, 2" drop spindles, and 2" blocks
this one is 6.75" off the ground, and still looks low enough for some serious attitude
Please bear in mind that there is some fudge room... These cabs were hand assembled. I have found as much as 5/8" of difference between floor to ceiling height on various cabs. Also take into account variables in S10 chassis components. An S10 with 200K will likely sit lower than one with 80K... springs do collapse over time.
|