The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Aaaarrrghh!!! Fitting a Chevy Caprice 307/TH350 combo to '65 Long Fleetside??

Shaky · 08-02-2014, 06:27 AM

This is super-easy. You just need the right frame-to-engine brackets for a small block, a cross-member to support the back of the trans, and the right length drive shaft.

I've seen a small-block placed on the straight six brackets, but it puts the engine very close to the firewall, especially if you have HEI. It might be worth it to have someone from the States ship you the right brackets. The rest can probably be accomplished over there.

Cheers!

08-02-2014, 06:27 AM	#2
Shaky Six in a row makes it go... Join Date: Mar 2009 Location: Vacationland: Maine Posts: 1,346	Re: Aaaarrrghh!!! Fitting a Chevy Caprice 307/TH350 combo to '65 Long Fleetside?? This is super-easy. You just need the right frame-to-engine brackets for a small block, a cross-member to support the back of the trans, and the right length drive shaft. I've seen a small-block placed on the straight six brackets, but it puts the engine very close to the firewall, especially if you have HEI. It might be worth it to have someone from the States ship you the right brackets. The rest can probably be accomplished over there. Cheers! __________________ 67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce Last edited by Shaky; 08-02-2014 at 06:30 AM. Reason: Add info