[clinebarger]

Time for the Reaction Planet, Soak The Torrington bearing in ATF, 2 dabs of transjel to hold the bearing, Roll the Planet through the ATF lubing the Pinions & internal bearing.
Install Planet into Carrier, Insert your Index & Middle finger through the center of the Planet while installing.

Put a dab of Tranjel on the Case where the Anti Clunk spring goes, Install spring as shown in the pic.

***************************************************************
**NOTE** Soak all Frictions for at least 30 min. before installing!
Lightly sand all steels plates where they meet a Friction, Don't go crazy, This is just a surface prep. Wash steels afterward!
***************************************************************

Install the Low/Reverse Wave Plate with the Notched tab at the 6 0'clock position.
Steel plate next.
Then a Friction.
Keep alternating Steel-Friction 'till you run out, 5 Frictions in the Low/Reverse clutch, When done you should be staring at a Friction NOT a Steel!