The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

locoluis30 · 01-06-2015, 11:26 AM

I have an 86 truck with the stock gearbox and steering pump , still there as I am upgrading everything with billet pulleys. I have the billet pulley for the pump already, but is bolt on , so I got me a 70 camaro remanufactured pump (bolt on) with the billet bracket as we'll. easy swap.I hate the press on pulley type. My problem is that my 86 stock pump has O rings and I believe metric fitting .How can I replace the lines to fit from my gearbox to the 70 camaro pump? Thanks!

01-06-2015, 11:26 AM	#1
locoluis30 Registered User Join Date: Jul 2011 Location: New York Posts: 16	Saginaw power steering pump I have an 86 truck with the stock gearbox and steering pump , still there as I am upgrading everything with billet pulleys. I have the billet pulley for the pump already, but is bolt on , so I got me a 70 camaro remanufactured pump (bolt on) with the billet bracket as we'll. easy swap.I hate the press on pulley type. My problem is that my 86 stock pump has O rings and I believe metric fitting .How can I replace the lines to fit from my gearbox to the 70 camaro pump? Thanks!