The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**BP Automotive** · 01-10-2015, 10:37 PM

The two terminals away from the plunger are the TCC Circuit. How the switch is meant to be installed is the plunger is pressed by the pedal in the resting position, then when the pedal is pressed the plunger OPENS and is not pressed. This closes the front two contacts by the plunger.

When installed and the brake pedal NOT pressed, the plunger WILL be pressed.

01-10-2015, 10:37 PM	#5
BP Automotive Registered User Join Date: Jan 2015 Location: Columbia, KY Posts: 26	Re: Wiring Brake light / TCC The two terminals away from the plunger are the TCC Circuit. How the switch is meant to be installed is the plunger is pressed by the pedal in the resting position, then when the pedal is pressed the plunger OPENS and is not pressed. This closes the front two contacts by the plunger. When installed and the brake pedal NOT pressed, the plunger WILL be pressed.