View Single Post
Old 02-21-2015, 11:44 PM   #3
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
Re: Master cylinder options

Quote:
Originally Posted by tobiahr View Post
you might gain some clearance using a hydroboost unit. I know they came stock on some of the suburban 2500's. This may give you some side clearance but not really help if it just sticks out to far from the firewall.
http://bangshift.com/general-news/te...-car-or-truck/
That would help but there's a lot of problems still there. The truck he's trying to mimic has tons of engine set-back he doesn't have plus engineering the same pedal ratio into the linkage when you pivot it off angle. If you really want the long shocks, I'd rather engineer the mounts around the brakes than the other way around.
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote