I just finished my install, I decided to go with four 4" infinity's in custom boxes running off a pioneer deh-6000ub. No modifications to the truck at all, and the seat can move through all its travel without issue. The 6x9's were too big imo and a set of 6x9 boxes would not fit. 6" x6" is about as big of a box as will fit without interference,imo.
This is with the seat in place and all the way back, the overhang at the front of the seat makes it look closer than it is.
My original plan was to relocate the faceplate but I've found a piece of reflective tape on the floor vent allows the remote to work if it's pointed at the trans tunnel.
Posted via Mobile Device