Quote:
Originally Posted by 68JOHNDEERE
Your next move would be to use a hook tool or bent tip thin screw and pull that along in the filler strip groove and pull that outer lip out over the lip of the glass to open the locking groove up.
|
Well, you did hit the nail on the head. Thank you.
I had a bent tip screwdriver in my tool chest. I used that and a piece of wood I shaped from a paint stirring stick. I used a regular screwdriver as well.
Thanks to all of you who responded! You all helped keep me sane.
For those that know me from here or trifive.com, I hardly ever complain about doing a job. But this one was a real beyotch.
Next up is the w/s. I hope that one goes OK.