Quote:
Originally Posted by JJorgensen52
Since I was using the square body lines, I mounted it on the front cross member just like they do. I used the square body cross member for the sway bar mounts, but the same position will work on a 67-72 cross member no problem
I happened to have a second '67 truck harness laying around, and the harness - prop valve wire is made in two pieces with a connector where it leaves the main harness. By pulling that piece off my spare harness, I was able to plug into the extension already on the '72 and reach the prop valve on the cross member no problem.
|
First off I'd like to thank you for your part of the write up and all your photos and I have a question what year make and model did you get all your parts from so I know because I see that you wrote 87 but kinda car ?