[darkhorse970]

Originally Posted by Classic Bowties

Here you go, the below hardware (pic. 4, 5 & 6) is everything needed to bolt a 67/68 buddy bucket setup back together plus a cab to center jumpseat brace. If you end up finding out that you are missing any pieces when going back together I should be able to help with any of the hardware besides the four pass. side seat riser to frame mounting brackets, currently only have enough of them for the complete seat setups onhand. Have a few original OE cab braces along with the reproed copies of the cab brace available, also had the drivers side adjustment track wires reproed and currently have a few extra 67/68 LH/drivers seat adjuster track sets with handles available along with two extra buddy seat frames which are all real deal OE GM & not halfbreeds. Mel

I know this is an old thread But if you still have some extra buddy bucket hardware pieces I need one of the brackets that bolts the center seat to the round tube frame. Thanks for any assistance you can offer.