The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jayoldschool** · 09-30-2015, 09:42 PM

Don't be afraid to do this job yourself. It's not difficult. I rebuilt the driveshaft in my 65 LWB myself. I used an inexpensive joint press, but you can do it with a big vise and sockets.

09-30-2015, 09:42 PM	#12
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,154	Re: U Joint Questions Don't be afraid to do this job yourself. It's not difficult. I rebuilt the driveshaft in my 65 LWB myself. I used an inexpensive joint press, but you can do it with a big vise and sockets.