|
Re: 1 ton 52's
Quote:
Originally Posted by nvrenuf
Here are pics of my set up -
The front adjustable "B52" hangers from DIY4X.com (same pic CrewCab59 previously posted)
My rear hanger rolled forward (reusing what is now the lower rear bolt hole) with 6" shackles.
Side shot showing the axle 2" forward. (I've since changed wheels and cut the wheel openings larger)
 |
So with your setup, you have the spring bolted in the forward most hole on the front hanger, and you axle is 2" forward, with the shackle hanger moved forward, so to retain stock axle position couldn't you move the front of the spring back a couple holes, then leave the rear hanger in the stock position with a longer shackle to keep a decent shackle angle like you've got?
__________________
Zach
1970 Chevrolet Custom Camper K20
1971 GMC Super K2500, 12V/NV4500 swap in progress
1971 Chevrolet Custom C10
1972 Chevrolet Custom Deluxe C20, 5.3/4L60E
1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi
2004 GMC Sierra 2500HD, LB7/Allison, CCSB
2005 GMC Sierra 1500, 5.3/4L60E, CCSB
|