The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mr48chev · 12-12-2015, 11:24 PM

When I bought the crossmember and A arms that I have from Welder Joe another of the outlets for the Hoffman group stuff I emailed them and they emailed me the drawings for setting it up.

I think that with a bit of searching you can find the plans/instructions for installing a MII front end in your truck that are clear enough so that you can follow them.

Here is the Heidts instructions from Speedway http://static.speedwaymotors.com/pdf...9%20Heidts.pdf

Welder series also has some universal instructions that might help. They are truly universal instructions that require the reader to do a lot of work on their own following the instructions. http://www.welderseries.com/instruct...s/WS14340N.pdf

12-12-2015, 11:24 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,342	Re: So I bought a Helix IFS kit... When I bought the crossmember and A arms that I have from Welder Joe another of the outlets for the Hoffman group stuff I emailed them and they emailed me the drawings for setting it up. I think that with a bit of searching you can find the plans/instructions for installing a MII front end in your truck that are clear enough so that you can follow them. Here is the Heidts instructions from Speedway http://static.speedwaymotors.com/pdf...9%20Heidts.pdf Welder series also has some universal instructions that might help. They are truly universal instructions that require the reader to do a lot of work on their own following the instructions. http://www.welderseries.com/instruct...s/WS14340N.pdf __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.