The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

r8e1d · 02-10-2016, 10:59 AM

Thanks Swamp Rat!

Started working on the AC electrical yesterday. Found the AC switch connector when i tore everything out and figured it would need a rewire. Can't tell if it was broken off or got hot. Pulled the wire and found 2 jumpers inserted for the compressor switch and blower motor resistor. Funny thing is both components were there and the compressor switch works, I don't know what the Ohm measurement should be for the resistor though.

Red

02-10-2016, 10:59 AM	#7
r8e1d Registered User Join Date: Oct 2015 Location: Victoria TX Posts: 40	Re: Red's 68 GMC K15 Update Thanks Swamp Rat! Started working on the AC electrical yesterday. Found the AC switch connector when i tore everything out and figured it would need a rewire. Can't tell if it was broken off or got hot. Pulled the wire and found 2 jumpers inserted for the compressor switch and blower motor resistor. Funny thing is both components were there and the compressor switch works, I don't know what the Ohm measurement should be for the resistor though. Red Attached Images