The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MP&C · 03-12-2016, 10:02 PM

Today we got the second inner fender cut out, and took them both over for a test fit on the truck

The driver's side has a bolting plate in the middle of the frame for the steering box, so a relief notch was in order...

....as well as a bit of trimming for some clearance so that the paint won't be chipped off on the first test drive. The fabrication of these parts are done, and we should pick up the new Tommasini Wheeling Machine this coming weekend so we can get started on the fender patches..

03-12-2016, 10:02 PM	#2
MP&C Registered User Join Date: Jan 2013 Location: Leonardtown, MD Posts: 1,636	Re: 1947 Biederman Truck Fender repairs Today we got the second inner fender cut out, and took them both over for a test fit on the truck The driver's side has a bolting plate in the middle of the frame for the steering box, so a relief notch was in order... ....as well as a bit of trimming for some clearance so that the paint won't be chipped off on the first test drive. The fabrication of these parts are done, and we should pick up the new Tommasini Wheeling Machine this coming weekend so we can get started on the fender patches.. __________________ Robert