I have an 89 Suburban V1500 I am doing hydroboost on, so I am in the market for a bracket/plate assembly.
I have a hydroboost from a 99 silverado I plan on using but the mounting between the two is fairly different.
Heres the hydroboost I have:
http://i.imgur.com/B9vdQZK.jpg
The issue I have is that two of the holes on the firewall (and on the pedal assembly) are to the sides of the larger push rod hole and not above it. Also, there are 6 bolts on the booster, two up at the very top, that I assume I just wouldn't need anymore.
Here is a picture of my firewall to get a better idea:
http://i.imgur.com/Gvulyo6.jpg
Is this a part you make or can make?