Re: Restoring Rusty
Quote:
Originally Posted by Gregski
the transmission bracket that goes between the transmission and the crossmember looks different than the one for the SM465 granny gear Muncie, slightly different, they both attach to the trans with two bolts and that top part matches, but the bottom is different the Muncie attaches with two bolts, the 833 uses just one
top Muncie bracket
bottom 833 bracket
keep in mind I have not done this swap yet, I am in the process so if I state or make any mistakes, please correct me
|
you can use the 2 bolt if you like dependent on your cross member. Or if you have a preference of one or two bolts. mount height is the only thing you might need to watch for. GM used basically 2 different heights. the difference is about 1 inch between the two
__________________
1977 Chevrolet C/10 Silverado. Step-Side, Factory 454, TH400, 3.73 Posi 12 Bolt.
1975 Chevrolet El Camino. 350, TH400, 3.08 Posi 10 Bolt.
|