|
Re: My '63 C10 "I'd rather be driving" Project
4WD vans were quite rare, but 3/4 ton vans had 6 lug axles. You would see Camper Conversion vans with this setup.
Both my trucks are at a Buddy's farm since I needed the room to build the new Garage. I'll have to pass by and take some measurements.
Found a thread on this site stating that you can reverse the center portion on the ring but can't push it back as the ring tapers and you lose material.
More measuring on the wheel will be required to see if I could shim the center to the larger diameter required, as not to reverse the ring and change the look.
Thank you for the info.
|