[ryanroo]

i decided to rebuild the alternator mount. it had the stock cummins upper mount and an adapter plate i made to space it up a bit. i wanted something one piece.







part of the motivation for that was the need for air inlet tubing support. i made a bracket down low and a support rod off of the alt mount for the top. now the compressor snout wont be supporting the weight.





next was oil lines. i used a strait and a 90* #10 ORB adapter to get out of the oil cooler housing.





the #10 lines split into #8s and go to the dual filters in parallel. they are not tied down in the pics, i built them and hid them on the shelf so they are not in the way for now.