Quote:
Originally Posted by boostedc10
You can run an F-body harness but you will have to either use the F-body injectors or change the connectors. As for the transmission you can run an 80e by adding a input speed sensor and wiring 2 wires to the PCM. The rest of the connectors are the same, the only other mod you will need to make is to the round connector on the transmission. Terminal U gets moved to terminal S and the original wire in S is no longer used. Hope this helps.
|
very helpful! thank you.
A friend tried to steer me away from the 4l80 saying it was "more work than what its worth" and said to just built the th400.