Re: Harold's '48 S10 LS1 Build
I started on my wheel tubs last weekend. I decided to make these out of fiberglass. I'm making the plug out of pine, and will use that to cast my mold. I little more sanding and painting, and this should be ready to start the fiberglass work. The depth is 2-1/4" x 5.5" high.
I had found a set of steel tubs, but I would have to cut away about half of the height, due to the bed depth loss. Besides, I'm not planning on doing any heavy hauling. So the fiberglass is a cheaper and easier option.
|