The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MP&C · 09-14-2016, 10:34 PM

Thanks!

Time to break out the TIG welder. The new stumps for the upcoming metalshaping class work well as a welding table. The patch is securely clamped from inside to outside to get an accurate marking for tipping the fold around the wire.

Flexible Spline is used to carry the opening mark down the patch...

Tacked in with the TIG

Next we'll wrap the wire and trim the front edge to size.

09-14-2016, 10:34 PM	#21
MP&C Registered User Join Date: Jan 2013 Location: Leonardtown, MD Posts: 1,637	Re: 1947 Biederman Truck Fender repairs Thanks! Time to break out the TIG welder. The new stumps for the upcoming metalshaping class work well as a welding table. The patch is securely clamped from inside to outside to get an accurate marking for tipping the fold around the wire. Flexible Spline is used to carry the opening mark down the patch... Tacked in with the TIG Next we'll wrap the wire and trim the front edge to size. __________________ Robert