The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

47 Fasttoys · 12-13-2016, 06:23 PM

Very nice Lower. How did you attach the floor and walls to the steel frame? I was thinking 1 1/2 square tube with bolts. I would need to bore a larger hole in the bottom of the frame as to keep it flat on the bottom. I think my biggest issue will be the changing radius for the top, that's gonna be a challenge. I think I have got it figured out how to attach the camper steel frame to the steel truck bed and how to remove it so I can roll it into the shop when not in use but other things are yet to be solved. By the way the goal is to complete it by April 1st of next year and 3K max.
Rob

12-13-2016, 06:23 PM	#787
47 Fasttoys Registered User Join Date: Sep 2013 Location: Westminster, SC Posts: 933	Re: Loadmaster '47 COE Very nice Lower. How did you attach the floor and walls to the steel frame? I was thinking 1 1/2 square tube with bolts. I would need to bore a larger hole in the bottom of the frame as to keep it flat on the bottom. I think my biggest issue will be the changing radius for the top, that's gonna be a challenge. I think I have got it figured out how to attach the camper steel frame to the steel truck bed and how to remove it so I can roll it into the shop when not in use but other things are yet to be solved. By the way the goal is to complete it by April 1st of next year and 3K max. Rob __________________ My '47 C.O.E build