[TurboLS]

So got a few parts in today. My Hydro Booster, new Wilwood master cylinder and proportioning valve kit, and an Easy Guard security system which gives me a push button start and remote start (which I will try and attempt). I could also have keyless entry but my truck has manual locks not electric.

When I tried to mate the booster and master I was disappointed to find I had about a 1/4" gap. I contacted Performance Online and they referred me to Jeff, at Karps Power Brakes. Jeff recommended that I either drill out or grind down the Aluminum Bullet spacer that comes with the Wilwood master. Since I have a Mill and happened to have a 5/16 Ball End Mill, I chose to drill the hole. I worked it a little at a time until the master sat perfect on the booster. Now just waiting for the Booster to firewall bracket to show up.