The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

01spirit750 · 01-12-2017, 01:33 PM

I should mention that you need to remove the electrical connector on the fuel pick up flange during the soldering process (or you will melt the connector / isolator).

Here is a video I watched, skip to the 11 minute mark. I looped the solder around the tube 2x and then soldered it like in the video.

https://www.youtube.com/watch?v=OpMFQFi6Hh4

01-12-2017, 01:33 PM	#3
01spirit750 Registered User Join Date: Oct 2010 Location: Bay Area California Posts: 137	Re: fuel return line. I should mention that you need to remove the electrical connector on the fuel pick up flange during the soldering process (or you will melt the connector / isolator). Here is a video I watched, skip to the 11 minute mark. I looped the solder around the tube 2x and then soldered it like in the video. https://www.youtube.com/watch?v=OpMFQFi6Hh4