Re: Accessing under Floor Master Cylinder on Task Force
I made my own brackets based on aftermarket basic designs. I moved the booster and MC back so that the fill cap was behind the first cab cross brace. I made an adjustable rod between the lever and booster. Then fabbed the door as shown with piano hinge and capture nut. Used wiper hose around the cut edge of the door for a seal. I used Yukon 3rd row seats and made the frame so the tilt feature works (also for easy removal).
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
|