|
Re: LT1 GenV swap
Random bag of spacers i found on the side of the street
Surprisingly they fit the passenger side alternator mount lile a champ!
Used up all the random length bolts i could round up for mock up. Now just need to print the final template and cut it out on some 3/8 plate...
Ill re-do the power steering plates later to incorporate an idler pulley for more crank belt wrap.. maybe un necesssry but why not..
Still need to sort out the motor mounts.. 3/8 plate to adapt gen5 to sbc... leaves a 1/4 inch or so between the booster and valve cover.. so tight, i cannot install the beauty cover
With this setup, I can keep the vacuum pump and not have to worry about vacuum although i have 2 l83 manifolds and going to try something with one amd post the results of the test
Clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|