Re: 327 Compression Test - Results
***UPDATE***
Vacuum Test:
Okay, I have to set the idle at around 1,200RPM in order to keep it running long enough to check the Vacuum...
It sporadically, randomly, and slowly fluctuates between 14 and 16 @ 1,200RPM. When I rev it - it goes down to ZERO, then up to a little over 20... then back down to 14-16.
I'm a novice but I think this indicates a Vacuum leak. What is the best way to track it down? I've tried spraying starter fluid, but no luck.
Thanks
|