The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Transmission swap- TH350 to 700R4

beanious · 09-02-2017, 08:59 AM

Rebuild parts list below:

Based on a 2nd Gen 700R4 from 1988 K case
Summit rebuild kit that includes Alto red clutches and high end band
TransGo Pump Valve
Hardened Pump Shaft
Beast Sunshell
TCI Corvette Servo (Red aluminum cover, fancy...)
TCI Stainless Servo Cover, fancy...
PATC #2x torque converter with 1800 stall and balloon plate
TCI 5 gear input planetary
TCI 5 gear output planetary
Shortened hardened output shaft for 4x4 from Advanced Adapters
Hardened input drum and shaft
Molded aluminum-rubber pistons
Doorman 4L60E steel trans pan
TCI constant pressure valve body kit
Lokar loktite filler tube
Case Saver
Painless torque converter lockup kit
Lokar floor mounted shifter
Advanced Adapters aluminum TH350 to NP205 Adapter (Got it free)
300 PSI gauge temporarily mounted in the diagnostic port to be sure it has the correct pressures

09-02-2017, 08:59 AM	#2
beanious Registered User Join Date: Apr 2008 Location: Sacramento, CA Posts: 195	Re: Transmission swap- TH350 to 700R4 Rebuild parts list below: Based on a 2nd Gen 700R4 from 1988 K case Summit rebuild kit that includes Alto red clutches and high end band TransGo Pump Valve Hardened Pump Shaft Beast Sunshell TCI Corvette Servo (Red aluminum cover, fancy...) TCI Stainless Servo Cover, fancy... PATC #2x torque converter with 1800 stall and balloon plate TCI 5 gear input planetary TCI 5 gear output planetary Shortened hardened output shaft for 4x4 from Advanced Adapters Hardened input drum and shaft Molded aluminum-rubber pistons Doorman 4L60E steel trans pan TCI constant pressure valve body kit Lokar loktite filler tube Case Saver Painless torque converter lockup kit Lokar floor mounted shifter Advanced Adapters aluminum TH350 to NP205 Adapter (Got it free) 300 PSI gauge temporarily mounted in the diagnostic port to be sure it has the correct pressures Last edited by beanious; 09-06-2017 at 07:11 AM.